enplas
Contact UsSite mapJapanese
News ReleaseCorporate InformationBusiness OutlineTechnologiesInvestor Relations
HOME > Business Outline > LED Business > Products:Light Enhancer Cap
LED Business
Products
Light Enhancer Cap  
Light Enhancer Cap Module
Based on the luminous flux controlling technology acquired through the optical waveguide development, we have created a diffusing lens to facilitate the effective use of environmentally friendly LEDs with improved user-friendliness.The module achieves reduced power consumption and CO2 emissions.
 
Light Enhancer Cap
Detailed specification
Effectiveness of the Light Enhancer Cap
Comparison of signboard displays (the thickness of both display boards is identical)
When using LEDs only When using the Light Enhancer Cap
Light Enhancer Cap layout setting
In order to produce uniformed luminance on the display, the modules need to be spaced to make a number of equilateral triangles as described right.
Distance between the diffusing plate and the aluminum substrate
The following needs to be complied with in order to produce uniformed luminance on the display:
The distance between the diffusing plate and the aluminum substrate is 0.55 times larger than the distance between LEDs.
The following needs to calculate the signboard height:
Height + diffusing plate's thickness + aluminum substrate's thickness (1.5mm) + substrate backboard thickness.
Effectiveness of the Light Enhancer Cap when used for a signboard
Comparison of the numbers of LEDs used for a signboard with the size of 1,000 x 1,000 x D50
*Display thickness: 50mm (including the diffusing plate thickness of 3mm but excluding the substrate backboard thickness)
Number of LEDs: 168
Display illumination intensity:
Approximately 3,100lx
Brightness: Approximately 940cd/m2
Distance between LEDs: 83mm
Number of LEDs: 504
Display illumination intensity:
Approximately 10,000lx
Brightness: Approximately 3,000cd/m2
Distance between LEDs: 47mm
Cost effect estimation and reduction of CO2 emissions
Case example of the Light Enhancer Cap used in a signboard (signboard size: 2,800mm x 1,400mm)
Annual usage:12hrs per day=4.380hrs
Electricity rate:23yen/kwh
(Source:'Power comumption for business purpose', the Japan Luminaires Association)
*Power consumption includes inverter.

For more information about LED Busines, please contact us. Our addresses and phone numbers are available here. Contacts & Locations

Copyright Enplas Corporation